Pre-Owned
Photos of the actual unit, taken from our listing photos. Every engine is compression tested and supplied with warranty.
On The Fly Manual Jack Plate — Large Size, Crank-Adjust, With Owner’s Manual
Large size · manual crank-handle adjustment · silver anodised aluminium · owner’s manual included · presents as new, unmounted
Condition report
On The Fly manual jack plate in the Large size, photographed unmounted on the workbench as offered. All three photos tell the same story: silver anodised aluminium plates with no mounting marks, the crank-handle screw adjuster across the top, the manufacturer’s warning label in place, “OnTheFly JACK PLATES” branding on the side cheek — and the owner’s manual included, photographed with the unit. The plate presents as new and unused; we describe it exactly that way rather than beyond the evidence.
The maker’s own cover line on the manual calls it “the fastest manual jack plate on the market” (On The Fly Jack Plates, LLC) — the point of the design is setback plus height adjustment you can dial in from the transom with the crank, then lock and run. Setback and horsepower rating are not stated on the unit or legible in the photos, so we do not publish figures for them — measure your transom and ask our team to confirm suitability for your motor before purchase.
A jack plate moves the motor back off the transom and lets you raise it into cleaner water — better holeshot, more top end, shallower idle. A manual plate like this On The Fly Large does it with a simple, reliable crank screw instead of hydraulics: no pump, no hoses, nothing to leak, and a fraction of the cost and weight of a hydraulic unit.
For flats, bay and bass boats that run skinny water or need their motor height dialled in per load and prop, a manual plate is the pragmatic choice — set it, lock it, forget it.
What’s included
- Owner’s manual (photographed with the unit)
Ideal for
Flats boats, bay boats, bass boats and skiffs adding setback and height adjustment on a budget — and any rig where hydraulic weight, cost and maintenance are not justified.
Compatibility notes
- Confirm your motor’s bolt pattern, weight and transom layout before purchase — our team will help verify fitment for your rig.
- Manual plates suit single-engine installations where hydraulic adjustment is not required.
Delivery
Shipped nationwide within the US as a parcel. A 35% deposit reserves the item; the balance is due before dispatch. Local pickup in Fort Lauderdale, FL is welcome.
Product FAQ
What size is it?
The Large size, as listed by the seller. Setback and horsepower rating are not stated on the unit and are not legible in the photos, so confirm your motor’s weight and bolt pattern with our team before purchase.
Is it new?
It is unmounted and presents as new in the photos, with the owner’s manual included — we describe its condition exactly as photographed rather than claiming beyond the evidence.
How does a manual jack plate adjust?
By the crank-handle screw across the top of the unit (visible in every photo): wind it to raise or lower the motor, then lock it down and run. No hydraulics, pump or hoses.
What is included?
The jack plate and its owner’s manual, as photographed. Mounting hardware is not shown — ask our team what your installation needs.
Can it be shipped?
Yes — flat $39 US parcel freight. A 35% deposit reserves it.
Details
| Product | On The Fly manual jack plate — Large size |
|---|---|
| Material | Silver anodised aluminium |
| Adjustment | Manual crank-handle screw (no hydraulics) |
| Setback / HP rating | Not stated on the unit — confirm suitability with our team |
| Manual | Owner’s manual included |
| Condition | Presents as new — unmounted, photographed as offered |
| Price | $384 USD |
Figures are taken from our intake listing for this unit. Confirm model, fitment, and included equipment with our team before purchase.
More marine electronics & rigging
Pre-Owned
Pre-Owned